Filter Vlan - Cisco Nexus 7000 Series Reference Manual

filter vlan

filter vlan
To apply a VLAN access map to one or more VLANs, use the filter vlan command. To remove a VLAN
access map, use the no form of this command.
Syntax Description vlan_mrange
include-untagged (Optional) Specifies untagged frames on a port with Layer 3 subinterfaces.
Defaults None
Command Modes Config-monitor configuration (config-monitor)
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to apply a VLAN access map to one or more VLANs:
switch(config)# monitor session 1
switch(config-monitor)# filter vlan 5-10 include-untagged
switch(config-monitor)#
This example shows how to remove the VLAN access map:
switch(config-monitor)# no filter vlan 5-10 include-untagged
switch(config-monitor)#
Related Commands Command
filter vlan
include-untagged
Cisco Nexus 7000 Series NX-OS System Management Command Reference
198
filter vlan vlan_mrange [include-untagged]
no filter vlan vlan_mrange [include-untagged]
Name of the VLAN access map that you want to create or configure. The range is
from 1 to 3967 and from 4048 to 4093.
Modification
This command was introduced.
Description
Applies a VLAN access map to one or more VLANs and includes untagged
frames on a port with Layer 3 subinterfaces.
F Commands
OL-25806-03