show locator-led status
show locator-led status
To show the status of locator LEDs on the system, use the show locator-led status command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
4.1(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows the locator LED status for the system:
switch# show locator-led status
Xbar 1 : Locator LED off
Module 7 : Locator LED off
Module 9 : Locator LED off
Module 12 is not powered up.
Chassis Locator LED off
PowerSupply 1 : Locator LED off
PowerSupply 2 : Locator LED off
Fan 1 : Locator LED off
Fan 2 : Locator LED off
switch(config)#
Related Commands
Command
locator-led
Cisco Nexus 7000 Series NX-OS System Management Command Reference
530
show locator-led status
Modification
This command was introduced.
Description
Blinks an LED on the system.
Show Commands
OL-25806-03