Terminal Event-Manager Bypass - Cisco Nexus 7000 Series Reference Manual

T Commands

terminal event-manager bypass

To allow the CLI commands that match an Embedded Event Manager (EEM) policy to continue to run,
use the terminal event-manager bypass command. To prevent such commands from running, use the
no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.2(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to allow the CLI commands that match an EEM policy to continue to run:
switch# terminal event-manager bypass
switch#
This example shows how to prevent the CLI commands that match an EEM policy from running:
switch# terminal no event-manager bypass
switch#
Related Commands Command
event manager policy
OL-25806-03
terminal event-manager bypass
terminal no event-manager bypass
Modification
This command was introduced.
Description
Registers an Embedded Event Manager (EEM) policy with the EEM.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
terminal event-manager bypass
691