Ip Ttl - Cisco Nexus 7000 Series Reference Manual

I Commands

ip ttl

To configure the IP time-to-live (TTL) value of the Encapsulated Remote Switched Port Analyzer
(ERSPAN) traffic, use the ip ttl command.
Syntax Description ttl_value
Defaults 255
Command Modes
config-erspan-src and config-erspan-dst
Supported User Roles network-admin
network-operator
Command History Release
5.1(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to configure the IP TTL value of the ESRSPAN source:
switch# configure terminal
switch(config)# monitor session 5 type erspan-source
switch(config-erspan-src)# ip ttl 30
switch(config-erspan-src)#
This example shows how to configure the IP TTL value of the ESRSPAN destination:
switch# configure terminal
switch(config)# monitor session 3 type erspan-destination
switch(config-erspan-dst)# ip ttl 35
switch(config-erspan-dst)#
Related Commands Command
ip dscp
monitor-session
OL-25806-03
ip ttl ttl_value
Value of the IP TTL of the ERSPAN traffic. The range is from 1 to 255.
Modification
This command was introduced.
Description
Configures the DSCP value of the packets in the ERSPAN traffic.
Enters the monitor configuration mode for configuring an ERSPAN or
SPAN session for analyzing traffic between ports.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
ip ttl
225