Tag - Cisco Nexus 7000 Series Reference Manual

tag

tag
To correlate multiple events in the policy, use the tag command.
Syntax Description
tag
and
andnot
or
happens
in
occurs
seconds
Defaults
None
Command Modes (config-applet)
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to correlate multiple events in the policy:
switch# configuration terminal
switch(config)# event manager applet "monitorShutdown"
switch(config-applet)# description "Monitors interface shutdown."
switch(config-applet)# event cli match "shutdown"
switch(config-applet)# tag one or two happens 1 in 10000
switch(config-applet)# action 1.0 cli show interface e 3/1
Related Commands Command
show flow exporter
Cisco Nexus 7000 Series NX-OS System Management Command Reference
688
tag tag {and | andnot | or} tag [and | andnot | or {tag}] {happens occurs in seconds}
Tag name. The tag name can be any 29 alphanumeric characters.
(Optional) Specifies to use boolean and logic
(Optional) Specifies to use boolean andnot logic
(Optional) Specifies to use boolean or logic
Specifies the number of occurrences before raising the event.
Specifies the number of occurrences must occur within this time period.
Numbers of times that the event occurs. The range is from 1 to 4294967295.
Amount of time, in seconds, that the next event occurs. The range is from 0 to
4294967295 seconds.
Modification
This command was introduced.
Description
Displays information about NetFlow exporters.
T Commands
OL-25806-03