Show Diagnostic Events - Cisco Nexus 7000 Series Reference Manual

show diagnostic events

show diagnostic events
To display information about diagnostic events, use the show diagnostic events command.
Syntax Description
error
info
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.1(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to display diagnostic events:
switch# show diagnostic events
1) Event:E_DEBUG, length:114, at 404616 usecs after Wed Jan
9 Result->pass Reason->Success
2) Event:E_DEBUG, length:114, at 414835 usecs after Wed Jan
9 Result->pass Reason->Success
3) Event:E_DEBUG, length:107, at 294482 usecs after Wed Jan
t->pass Reason->Success
This example shows how to display diagnostic events by information type:
switch# show diagnostic events info
1) Event:E_DEBUG, length:114, at 934712 usecs after Wed Jan
Cisco Nexus 7000 Series NX-OS System Management Command Reference
456
show diagnostic events [error | info]
(Optional) Displays diagnostics by error type.
(Optional) Displays diagnostics by information type.
Modification
This command was introduced.
[104] Event_INFO: TestName->ASICRegisterCheck TestingType->helth monitoring module->
[104] Event_INFO: TestName->ASICRegisterCheck TestingType->helth monitoring module->
[104] Event_INFO: TestName->PwrMgmtBus TestingType->helth monitoring module->9 Resul
Show Commands
7 09:38:46 2009
7 09:38:26 2009
7 09:38:23 2009
7 11:40:06 2009
OL-25806-03