Cisco Nexus 7000 Series Reference Manual page 692

show startup-config snmp
Examples This example shows how to display the startup SNMP configuration of the system:
switch(config)# show startup-config snmp
!Command: show startup-config snmp all
!Time: Tue Feb
!Startup config saved at: Thu Jan 21 08:39:42 2010
version 5.0(2)
snmp-server aaa-user cache-timeout 3600
snmp-server protocol enable
no snmp-server globalEnforcePriv
snmp-server tcp-session auth
snmp-server user admin network-admin auth md5 0x1dc65f45a9d8e41dbccd76380946d6c3
priv 0x1dc65f45a9d8e41dbccd76380946d6c3 localizedkey
snmp-server enable traps ospf rate-limit 10 7
snmp-server enable traps ospf foo rate-limit 10 7
no snmp-server enable traps bridge topologychange
no snmp-server enable traps bridge newroot
no snmp-server enable traps stpx inconsistency
no snmp-server enable traps stpx loop-inconsistency
no snmp-server enable traps stpx root-inconsistency
switch(config-port-monitor)#
Related Commands Command
show running-config
snmp
show port-monitor
active
Cisco Nexus 7000 Series NX-OS System Management Command Reference
664
2 22:46:33 2010
Description
Displays the running SNMP configuration.
Displays active port-monitor policies.
Show Commands
OL-25806-03