Show Ntp Authentication-Status - Cisco Nexus 7000 Series Reference Manual

show ntp authentication-status

show ntp authentication-status
To display the status of the Network Time Protocol (NTP) authentication, use the show ntp
authentication-status command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the NTP authentication status:
switch(config)# show ntp authentication-status
Authentication enabled.
switch(config)#
Related Commands Command
ntp authenticate
show ntp authentica-
tion-keys
Cisco Nexus 7000 Series NX-OS System Management Command Reference
564
show ntp authentication-status
Modification
This command was introduced.
Description
Enables NTP authentication.
Displays the configured NTP authentication keys.
Show Commands
OL-25806-03