Show Commands
show ntp peer-status
To do display the status of the Network Time Protocol (NTP) peers, use the show ntp peer-status
command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the peer status for NTP:
switch(config)# show ntp peer-status
Related Commands
Command
show ntp peers
OL-25806-03
show ntp peer-status
Modification
This command was introduced.
Description
Displays information about NTP peers.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show ntp peer-status
569