Show Module - Cisco Nexus 7000 Series Reference Manual

Nx-os system management command reference

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

Show Commands

show module

To display module information, use the show module command.

Syntax Description

bandwidth-fairness

recovery-steps

Displays module information for all I/O modules and supervisor modules in the chassis.

Command Modes

Any command mode

Supported User Roles

network-admin

network-operator

vdc-operator

Command History

Usage Guidelines

This command does not require a license.

show module [slot {bandwidth-fairness | recovery-steps} | uptime | xbar [xbar-slot]]

(Optional) Number of the slot for an I/O module or a supervisor module.

Displays the status of the bandwidth fairness for the module.

Displays the steps to recover the module from a down state.

(Optional) Displays the amount of time since the modules were reloaded.

(Optional) Displays information about a fabric module.

(Optional) Number of the slot for the fabric module.

Modification

This command was introduced.

Output modified to show diagnostic events.

Cisco Nexus 7000 Series NX-OS System Management Command Reference