Show Configuration Session - Cisco Nexus 7000 Series Reference Manual

Show Commands

show configuration session

To show information about the configuration sessions, use the show configuration session command.
Syntax Description
name
status
summary
Defaults Display information for all sessions
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display information about a configuration session. Each line represents a
CLI command that Cisco NX-OS applies to the device when you commit the session.
switch# show configuration session myACLs
config session name myACLs
0001
0002
0003
This example shows how to display the status of a configuration session:
switch(config-s)# show configuration session status
Session Name
Last Action
Last Action Status
Last Action Reason
Last Action Timestamp : 00:00:00 UTC Jan 01 1970
This example shows how to display a summary of the configuration sessions:
OL-25806-03
show configuration session [name] [status] [summary]
(Optional) Name of the configuration session, The name can be any
case-sensitive, alphanumeric string up to 63 characters.
(Optional) Shows the status of the configuration sessions.
(Optional) Displays the summary of the active configuration sessions.
Modification
This command was introduced.
ip access-list test1
permit tcp any any
statistics
: myACLS
: None
: Success
: -NA-
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show configuration session
447