Source - Cisco Nexus 7000 Series Reference Manual

S Commands

source

To configure the NetFlow exporter interface to use to reach the NetFlow collector for the configured
destination, use the source command. To remove the source, use the no form of this command.
Syntax Description if-type
if-number
Defaults None
Command Modes NetFlow exporter configuration (config-flow-exporter)
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to configure the NetFlow exporter source interface:
switch(config)# flow exporter Netflow-Exporter-1
switch(config-flow-exporter)# source Ethernet3/11
switch(config-flow-exporter)#
This example shows how to remove the Netflow exporter source interface configuration:
switch(config-flow-exporter)# no source Ethernet3/11
switch(config-flow-exporter)#
Related Commands Command
show flow exporter
OL-25806-03
source if-type if-number
no source [if-type if-number]
Interface type. For more information, use the question mark (?) online help function.
Interface or subinterface number. For more information about the numbering syntax
for your networking device, use the question mark (?) online help function.
Modification
This command was introduced.
Description
Displays information about NetFlow exporters.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
source
399