Show Hardware Flow Utilization - Cisco Nexus 7000 Series Reference Manual

Nx-os system management command reference
Hide thumbs Also See for Nexus 7000 Series:
Table of Contents

Advertisement

show hardware flow utilization

show hardware flow utilization
To display information about NetFlow hardware flow utilization, use the show hardware flow
utilization command.
Syntax Description
module slot-number
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
4.0(1)
Usage Guidelines
You must have already enabled traffic monitoring with Flexible NetFlow before you can use the
show hardware flow utilization command.
This command does not require a license.
Examples
This example shows how to display the NetFlow sampler table utilization for module 2:
switch# show hardware flow utilization module 2
Flow Utilization:
Total number of flows
IPv4 flow creation failure
IPv6 flow creation failure
MPLS flow creation failure
L2 flow creation failure
IFE flow creation failure
OFE flow creation failure
IFE CF FIFO full failure
OFE CF FIFO full failure
IFE NT table full failure
OFE NT table full failure
NO freelist pointer failure
Hash Table(NH) page full failure = 0
IPMAC lookup failure
L2 ACL deny
Cisco Nexus 7000 Series NX-OS System Management Command Reference
510
show hardware flow utilization [module module]
(Optional) Displays information specific to a module.
Modification
This command was introduced.
0.00% (0/515090)
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
= 0
Show Commands
OL-25806-03

Advertisement

Table of Contents
loading

Table of Contents