Dscp - Cisco Nexus 7000 Series Reference Manual

D Commands

dscp

To specify the differentiated services code point (DSCP) for a NetFlow exporter, use the dscp command.
To remove the DSCP parameter, use the no form of this command.
Syntax Description dscp
Defaults
None
Command Modes NetFlow exporter configuration (config-flow-exporter)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the DSCP parameter:
switch(config)# Flow exporter Custom-NetFlow-Exporter-1
switch(config-flow-exporter)# dscp 32
switch(config-flow-exporter)#
This example shows how to remove the DSCP parameter:
switch(config-flow-exporter)# no dscp
switch(config-flow-exporter)
Related Commands Command
show flow exporter
OL-25806-03
dscp dscp
no dscp [dscp]
Differentiated services code point value. The range is from 0 to 63.
Modification
This command was introduced.
Description
Displays information about NetFlow exporters.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
dscp
135