Ntp Authenticate - Cisco Nexus 7000 Series Reference Manual

N Commands

ntp authenticate

To enable Network Time Protocol (NTP) authentication, use the ntp authenticate command. To disable
NTP authentication, use the no form of this command.
Syntax Description This command has no arguments or keywords.
Defaults
Disabled
Command Modes
Global configuration mode (config)
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1)
Usage Guidelines
Make sure that you are in the correct virtual device context (VDC). To change the VDC, use the switchto
vdc command.
This command does not require a license.
Examples This example shows how to enable NTP authentication:
switch(config)# ntp authenticate
switch(config)#
This example shows how to disable NTP authentication:
switch(config)# no ntp authenticate
switch(config)#
OL-25806-03
ntp authenticate
no ntp authenticate
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
ntp authenticate
287