show lldp tlv-select
show lldp tlv-select
To display the type, length, and value (TLV) configuration for the Link Layer Discovery Protocol
(LLDP), use the show lldp tlv-select command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
5.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the TLV configuration for LLDP:
switch(config)# show lldp tlv-select
switch(config)#
Related Commands
Command
show lldp dcbx
interface ethernet
lldp tlv-select
Cisco Nexus 7000 Series NX-OS System Management Command Reference
526
show lldp tlv-select
Modification
This command was introduced.
access-management
dcbx
port-description
port-vlan
system-capabilities
system-description
system-name
Description
Displays the local DCBX control status.
Specifies the TLVs to send and receive in LLDP packets.
Show Commands
OL-25806-03