Cisco Nexus 7000 Series Reference Manual page 359

P Commands
This example shows how to remove the interval configuration for PTP messages:
switch(config)# interface ethernet 5/1
switch(config-if)# no ptp announce interval 1
switch(config-if)#
Related Commands Command
ptp
ptp delay-request
minimum interval
ptp sync interval
ptp vlan vlan
OL-25806-03
Description
Enables or disables PTP on an interface.
Configures the minimum interval allowed between PTP delay-request
messages when the port is in the master state.
Configures the interval between PTP synchronization messages on an
interface.
Configures the PTP VLAN value on an interface.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
ptp announce
331