Transport Http Proxy Enable - Cisco Nexus 7000 Series Reference Manual

T Commands

transport http proxy enable

To enable Smart Call Home to send all HTTP messages through the HTTP proxy server, use the
transport http proxy enable command.
Syntax Description This command has no arguments or keywords.
Defaults Disabled
Command Modes
Call home configuration mode (config-callhome)
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
You can use this command only after the proxy server address has been configured.
The virtual routing and forwarding (VRF) instance used for transporting messages through the proxy
server is the same as that configured using the transport http use-vrf command.
This command does not require a license.
Examples This example shows how to enable Smart Call Home to send all HTTP messages through the HTTP
proxy server:
switch# configure terminal
switch(config)# callhome
switch(config-callhome)# transport http proxy server 192.0.2.1
switch(config-callhome)# transport http proxy enable
switch(config-callhome)#
Related Commands Command
transport http proxy
server
show callhome
transport
OL-25806-03
transport http proxy enable
Modification
This command was introduced.
Description
Configures the HTTP proxy server domain name server (DNS) name, IPv4
address, or IPv6 address.
Displays the transport-related configuration for Smart Call Home.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
transport http proxy enable
695