Match Datalink - Cisco Nexus 7000 Series Reference Manual

match datalink

match datalink
To configure the match data link (or Layer 2) attributes option in a flow record, use the match datalink
command. To remove the data link configuration, use the no form of this command.
Syntax Description mac
source-address
destination-address
ethertype
vlan
Defaults None
Command Modes
NetFlow record configuration (config-flow-record)
Supported User Roles network-admin
vdc-admin
Command History Release
4.1
Usage Guidelines
This command does not require a license.
Examples This example shows how to configure the match data link attributes option in a flow record:
switch(config)# flow record NetFlow1
switch(config-flow-record)# match datalink mac source-address
switch(config-flow-record)#
This example shows how to remove the data link match option from a flow record:
switch(config-flow-record)# no match datalink mac source-address
switch(config-flow-record)#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
262
match datalink {mac source-address | mac destination-address | ethertype | vlan}
no match datalink {mac source-address | mac destination-address | ethertype | vlan}
Specifies the MAC address.
Specifies the source MAC address.
Specifies the destination MAC address.
Specifies the EtherType.
Specifies the VLAN ID.
Modification
This command was introduced.
M Commands
OL-25806-03