System Watchdog Kgdb - Cisco Nexus 7000 Series Reference Manual

system watchdog kgdb

system watchdog kgdb
To configure the system to enter the Linux KGDB debugger on a watchdog failure, use the system
watchdog kgdb command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to configure the system to enter the Linux KGDB debugger on a watchdog
failure:
switch(config)# system watchdog kgdb
switch(config)#
Related Commands Command
system watchdog
system no watchdog
Cisco Nexus 7000 Series NX-OS System Management Command Reference
424
system watchdog kgdb
Modification
This command was introduced.
Description
Enables the watchdog feature.
Disables the watchdog feature.
S Commands
OL-25806-03