Diagnostic Test Simulation - Cisco Nexus 7000 Series Reference Manual

diagnostic test simulation

diagnostic test simulation
To simulate a diagnostic test for a module, use the diagnostic test simulation command
Syntax Description slot
test test-id
port
number
all
fail
random-fail
success
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to simulate a test result:
switch# diagnostic test simulation module 2 test 2 fail
switch#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
130
diagnostic test simulation module slot test test-id [port {number | all}] {fail | random-fail |
success}
Diagnostic test simulation module number. The range is from 1 to the number of
modules in the chassis.
Specifies the test ID. The range is from 1 to 15.
(Optional) Specifies the interface port to display.
Interface port number.
Specifies all interface ports.
Displays failed test results.
Displays random fail test results.
Displays pass test results.
Modification
This command was introduced.
D Commands
OL-25806-03