Cfs Distribute - Cisco Nexus 7000 Series Reference Manual

C Commands

cfs distribute

To globally enable Cisco Fabric Services (CFS) distribution for the device, use the cfs distribute
command. To disable CFS distribution, use the no form of this command. To remove the CFS
configuration, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults Enabled
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
4.1(2)
Usage Guidelines This command does not require a license.
In order to distribute configuration information, CFS distribution must be enabled for both the device
and the application.
CFS is enabled by default for the device. All devices in the fabric must have CFS enabled or they do not
receive distributions.
If CFS distribution is disabled for an application, that application does not distribute any configuration
and it does not accept a distribution from other devices in the fabric.
Examples This example shows how to enable CFS distribution:
switch(config)# cfs distribute
Related Commands show cfs status
role distribute
show application_name
status
cfs region
OL-25806-03
cfs distribute
no cfs distribute
Modification
This command was introduced.
Displays the CFS distribution status.
Enables CFS to distribute role configurations.
Displays the status of the specified application, including whether CFS
distribution is enabled for the application.
Specifies a region for limiting the CFS distribution scope.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
cfs distribute
41