Description (Netflow Sampler - Cisco Nexus 7000 Series Reference Manual

description (NetFlow sampler)

description (NetFlow sampler)
To add a description to a NetFlow sampler, use the description command. To remove the description,
use the no form of this command.
Syntax Description line
Defaults
None
Command Modes NetFlow sampler configuration (config-flow-sampler)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to add a description to a NetFlow sampler:
switch(config)# sampler Netflow-Sampler-1
switch(config-flow-sampler)# description Custom-Sampler-1
switch(config-flow-sampler)#
This example shows how to remove the description:
switch(config-flow-sampler)# no description
Related Commands Command
show sampler
Cisco Nexus 7000 Series NX-OS System Management Command Reference
104
description line
no description [line]
Description string. The string can have a maximum of 63 alphanumeric characters.
Modification
This command was introduced.
Description
Displays information about NetFlow samplers.
D Commands
OL-25806-03