F Commands
Command History
Release
6.2(2)
Usage Guidelines
You can configure filters for ingress or egress ERSPAN traffic based on a set of rules. A simple filter has
only one rule, and multiple fields or conditions can be added to this rule. The packets are spanned only
if all conditions are met.
Port channel member lane is not supported on F1 Series modules.
F2 and F2e Series modules do not support egress SPAN filtering for destination MAC addresses and
source MAC addresses.
This command does not require a license.
Examples
This example shows how to configure filters for an ERSPAN session:
switch# configure terminal
switch(config)# monitor session 3 type erspan-source
switch(config-erspan-src)# filter vlan 3-5
switch(config-erspan-src)# filter trace-route true
Related Commands
Command
filter (SPAN)
OL-25806-03
Modification
This command was introduced.
Description
Configures the filters for a SPAN session.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
filter (ERSPAN)
183