Show System Standby Manual-Boot - Cisco Nexus 7000 Series Reference Manual

show system standby manual-boot

show system standby manual-boot
To display the status of the system standby manual boot option, use the show system standby
manual-boot command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the status of the system standby manual boot option:
switch(config)# show system standby manual-boot
system standby manual-boot option is enabled
switch(config)#
Related Commands Command
system hap-reset
Cisco Nexus 7000 Series NX-OS System Management Command Reference
676
show system standby manual-boot
Modification
This command was introduced.
Description
Enables the Supervisor Reset HA policy.
Show Commands
OL-25806-03