Diagnostic Start - Cisco Nexus 7000 Series Reference Manual

diagnostic start

diagnostic start
To start the on-demand diagnostic test for a module, use the diagnostic start command.
Syntax Description
slot
test
test-id
test-name
all
non-disruptive
port
port-number
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to start the on-demand diagnostic test for a module:
switch# diagnostic start module 6 test all
Related Commands Command
diagnostic stop
Cisco Nexus 7000 Series NX-OS System Management Command Reference
128
diagnostic start module slot test [test-id | test-name | all | non-disruptive] [port port-number | all]
(Optional) Diagnostic start slot number. The range is from 1 to 10.
Displays the diagnostic test.
(Optional) Test ID. The range is from 1 to 14.
(Optional) Test name. The name can be any case-sensitive, alphanumeric string up to
32 characters.
(Optional) Displays all ports.
(Optional) Displays the nondisruptive tests.
(Optional) Displays the port interface.
(Optional) Interface port number.
Modification
This command was introduced.
Description
Stops on-demand diagnostics.
D Commands
OL-25806-03