Snmp-Server Protocol Enable - Cisco Nexus 7000 Series Reference Manual

snmp-server protocol enable

snmp-server protocol enable
To enable the Simple Network Management Protocol (SNMP), use the snmp-server protocol enable
command. To disable SNMP, use the no form of this command.
Syntax Description This command has no arguments or keywords.
Defaults
Enabled
Command Modes
Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(3)
Usage Guidelines Use the no snmp protocol enable command to disable SNMP and close any TCP or UDP ports
associated with the protocol.
This command does not require a license.
Examples This example shows how to disable SNMP:
switch# configure terminal
switch(config)# no snmp-server protocol enable
Cisco Nexus 7000 Series NX-OS System Management Command Reference
390
snmp-server protocol enable
no snmp-server protocol enable
Modification
This command was introduced.
S Commands
OL-25806-03