Destination-Profile Message-Level - Cisco Nexus 7000 Series Reference Manual

D Commands

destination-profile message-level

To specify a severity level for alerts that are sent to the Call home destination, use the
destination-profile message-level command.
Syntax Description profile_name
message-level
number
Defaults
None
Command Modes Call home configuration (config-callhome)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to specify that messages with a severity level 5 or higher are sent to a Call home
destination:
switch(config-callhome)# destination-profile acme_destination message-level 5
Related Commands Command
show callhome
destination-profile
show callhome
OL-25806-03
destination-profile profile_name message-level number
Name you have given the Call home destination profile where the message format is
to be specified.
Specifies the severity level at which messages that are sent to the Callhome
destination.
Message severity level designations that begin at the lowest urgency level 0 and
progress to level 9, the most urgent. If you specify level 5, for example, all messages
designated level 5 or higher are sent to the destination.
Modification
This command was introduced.
Description
Displays a Call home destination profiles.
Displays the Call home configuration.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
destination-profile message-level
117