Show Lldp Timers - Cisco Nexus 7000 Series Reference Manual

Show Commands

show lldp timers

To display the Link Layer Discovery Protocol (LLDP) hold time, delay time, and update frequency
configuration, use the show lldp timers command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the LLDP hold time, delay time, and update frequency configuration:
switch(config)# show lldp timers
LLDP Timers:
switch(config)#
Related Commands Command
show lldp holdtime
lldp reinit
lldp timer
OL-25806-03
show lldp timers
Modification
This command was introduced.
Holdtime in seconds: 180
Reinit-time in seconds: 6
Transmit interval in seconds: 45
Description
Specifies the amount of time in seconds that a receiving device should hold
the information sent by your device before discarding it.
Specifies the delay time in seconds for LLDP to initialize on any interface.
Specifies the transmission frequency of LLDP updates in seconds.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show lldp timers
525