Cisco Nexus 7000 Series Reference Manual page 213

Nx-os system management command reference

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

Usage Guidelines

You can configure filters for ingress or egress SPAN traffic based on a set of rules. A simple filter has

only one rule, and multiple fields or conditions can be added to this rule. The packets are spanned only

if all conditions are met.

Port channel member lane is not supported on F1 Series modules.

F2 and F2e Series modules do not support egress SPAN filtering for destination MAC addresses and

source MAC addresses.

This command does not require a license.

This example shows how to configure filters for an SPAN session:

switch# configure terminal

switch(config)# monitor session 3

switch(config-monitor)# filter vlan 3-5

switch(config-monitor)# filter trace-route true

Related Commands

filter (ERSPAN)

show monitor session

Configures the filters for an ERSPAN session.

Displays information about a SPAN or ERSPAN session.

Cisco Nexus 7000 Series NX-OS System Management Command Reference

filter (SPAN)