Show Ntp Status - Cisco Nexus 7000 Series Reference Manual

show ntp status

show ntp status
To display the Network Time Protocol (NTP) distribution status, use the show ntp status command.
Syntax Description
>
>>
|
Defaults Disabled
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.1(2)
Usage Guidelines This command shows whether Cisco Fabric Services (CFS) is enabled or disabled for the NTP
application and whether a fabric lock is in place because a configuration is in progress.
This command does not require a license.
Examples
This example shows how to display the CFS distribution status for NTP. In this example, CFS
distribution is enabled and the fabric is locked. When a configuration is in progress on a CFS-enabled
device, the fabric is locked until the change is committed and the configuration is distributed throughout
the fabric. The lock prevents multiple configurations occurring at the same time.
switch(config)# show ntp status
Distribution : Enabled
Last operational state: Fabric Locked
Cisco Nexus 7000 Series NX-OS System Management Command Reference
578
show ntp status [ > | >> | | ]
(Optional) Redirects the command output to a file.
(Optional) Redirects the command output to a file in append mode.
(Optional) Pipes the command output to a filter.
Modification
This command was introduced.
Show Commands
OL-25806-03