Show Ptp Corrections - Cisco Nexus 7000 Series Reference Manual

Show Commands

show ptp corrections

To display the history of the Precision Time Protocol (PTP) clock corrections on the Ethernet interfaces,
use the show ptp corrections command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
5.2(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to display the history of the PTP clock corrections on the Ethernet interfaces:
switch# show ptp corrections
PTP corrections
------------------------------------------
Slave Port
---------- -------------------- ------------
Eth7/10
Eth7/10
Related Commands Command
show ptp brief
show ptp clock
show ptp clocks
foreign-masters-record
show ptp parent
OL-25806-03
show ptp corrections
Modification
This command was introduced.
Sup time
2010 Mar 11 03:14:55
2010 Mar 11 03:14:55
Description
Displays the PTP status.
Displays the properties of the local clock.
Displays the state of foreign masters known to the PTP process.
Displays the properties of the PTP parent.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
Corrections(s,ns)
-1 1210900
-340978
show ptp corrections
605