Contract-Id - Cisco Nexus 7000 Series Reference Manual

C Commands

contract-id

To specify a service agreement contract ID in Call home, use the contract-id command. To remove it,
use the no form of this command.
Syntax Description contract_id_
number
Defaults None
Command Modes Call home configuration
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure a service agreement contract ID in Call home:
switch(config-callhome)# contract-id Contract5678
Related Commands Command
callhome
email-contact
phone-contact
streetaddress
customer-id
site-id
switch-priority
show callhome
OL-25806-03
contract-id contract_id_number
no contract-id
Contract number for this device from the service agreement. The contract number
can be up to 255 alphanumeric characters in free format.
Modification
This command was introduced.
Description
Places you into Call home configuration mode.
Specifies the e-mail address of the person responsible for the device.
Specifies the phone number of the person responsible for the device.
Specifies the street address of the person responsible for the device.
Specifies the service agreement customer number for this device.
Specifies the site ID number for this device.
Specifies the priority number for this device.
Displays the Call home configuration.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
contract-id
93