Match Ip - Cisco Nexus 7000 Series Reference Manual

match ip

match ip
To configure the match IP option for defining a NetFlow record map, use the match ip command. To
remove this option, use the no form of this command.
Syntax Description protocol
tos
Defaults
None
Command Modes NetFlow record configuration (config-flow-record)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the match IP option for defining a NetFlow record map:
switch(config)# flow record Custom-NetFlow-Record-1
switch(config-flow-record)# match ip protocol
switch(config-flow-record)# match ip tos
switch(config-flow-record)#
This example shows how to remove the match option:
switch(config-flow-record)# no match ip protocol
switch(config-flow-record)# no match ip tos
switch(config-flow-record)#
Related Commands Command
show flow record
Cisco Nexus 7000 Series NX-OS System Management Command Reference
264
match ip {protocol | tos}
no match ip {protocol | tos}
Specifies the protocol.
Specifies the type of service (ToS).
Modification
This command was introduced.
Description
Displays information about NetFlow records.
M Commands
OL-25806-03