Show Diagnostic Status - Cisco Nexus 7000 Series Reference Manual

show diagnostic status

show diagnostic status
To display the test status for all tests, use the show diagnostic status command.
Syntax Description
slot
Defaults None
Command Modes Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the test status for all tests on a module:
switch# show diagnostic status module 6
==============================================
Card:(6) Supervisor module-1X
==============================================
Current running test
Currently Enqueued Test
switch#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
462
show diagnostic status module slot
Diagnostic status slot number. The range is from 1 to 10.
Modification
This command was introduced.
<BU>-Bootup Diagnostics, <HM>-Health Monitoring Diagnostics
<OD>-OnDemand Diagnostics, <SCH>-Scheduled Diagnostics
-NA-
-NA-
Run by
-NA-
Run by
-NA-
Show Commands
OL-25806-03