Cisco Nexus 7000 Series Reference Manual page 36

action exceptionlog
action exceptionlog
To log an exception if the specific conditions are encountered when an Embedded Event Manager (EEM)
applet is triggered, use the action exceptionlog command. To remove the exception log, use the no form
of this command.
Syntax Description
label
module module
syserr error
devid id
errtype type
errcode code
phylayer layer
ports list
harderror error
desc string
Defaults
None
Command Modes Embedded event manager
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
8
action label exceptionlog module module syserr error devid id errtype type errcode code
phylayer layer ports list harderror error [desc string]
no action label exceptionlog module module syserr error devid id errtype type errcode code
phylayer layer ports list harderror error [desc string]
Unique identifier that can be any string value. Actions are sorted and run in an
ascending alphanumeric sequence using the label as the sort key. If the string
contains embedded blanks, enclose it in double quotation marks.
Records an exception for the specified module number.
Records an exception for the specified system error.
Records an exception for the specified device ID.
Records an exception for the specified error type.
Records an exception for the specified error code.
Records an exception for the specified physical layer.
Records an exception for the specified ports.
Records an exception for the specified hard error.
(Optional) Specifies a description of the exception logging condition.
Modification
This command was introduced.
A Commands
OL-25806-03