Match Ipv4 - Cisco Nexus 7000 Series Reference Manual

M Commands

match ipv4

To configure the match IPv4 option for defining a NetFlow record map, use the match ipv4 command.
To remove this option, use the no form of this command.
Syntax Description source
destination
address
Defaults
None
Command Modes
NetFlow record configuration (config-flow-record)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the match IPv4 option for defining a NetFlow record map:
switch(config)# flow record Custom-NetFlow-Record-1
switch(config-flow-record)# match ipv4 source address
switch(config-flow-record)# match ipv4 destination address
switch(config-flow-record)#
This example shows how to remove the match IPv4 configuration:
switch(config-flow-record)# no match ipv4 source address
switch(config-flow-record)# no match ipv4 destination address
switch(config-flow-record)#
Related Commands Command
show flow record
OL-25806-03
match ipv4 {source | destination} address
no match ipv4 {source | destination} address
Specifies the source address.
Specifies the destination address.
Specifies the address.
Modification
This command was introduced.
Description
Displays information about NetFlow records.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
match ipv4
265