Cisco Nexus 7000 Series Reference Manual page 394

sampling
sampling
To set the sampling range for Switched Port Analyzer (SPAN) packets, use the sampling command. To
revert to the default settings, use the no form of this command.
Syntax Description range
Defaults None
Command Modes Sampling only applies to local SPAN (config-monitor) and ERSPAN source session
(config-monitor-erspan-src) configuration.
Supported User Roles network-admin
vdc-admin
Command History Release
6.1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to set the sampling range for the SPAN packets:
switch(config)# monitor session 3 type erspan-source
switch(config-erspan-src)# sampling 100
switch(config-monitor)#
Related Commands Command
monitor session
Cisco Nexus 7000 Series NX-OS System Management Command Reference
366
sampling range
no sampling
Sampling range. Every nth packet will be spanned. The range is from 2 to
1023.
Modification
This command was introduced.
Description
Enters the monitor configuration mode.
S Commands
OL-25806-03