Show Diagnostic Simulation - Cisco Nexus 7000 Series Reference Manual

Show Commands

show diagnostic simulation

To display information about a simulated diagnostic for a module, use the show diagnostic simulation
command.
Syntax Description slot
Defaults None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display information about simulated diagnostics:
switch# show diagnostic simulation module 6
Card(6): Supervisor module-1X
________________________________________________
switch#
Related Commands Command
diagnostic test
simulation
OL-25806-03
show diagnostic simulation module slot
Diagnostic simulation slot number. The range is from 1 to 10.
Modification
This command was introduced.
-NA-
Description
Sets a simulated test result for a diagnostic test.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show diagnostic simulation
461