Show Logging Nvram - Cisco Nexus 7000 Series Reference Manual

Show Commands

show logging nvram

To display the messages in the NVRAM log, use the show logging nvram command.
Syntax Description
last number-lines
Defaults None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the last 20 messages in the NVRAM log:
switch# show logging nvram last 20
switch#
OL-25806-03
show logging nvram [last number-lines]
(Optional) Specifies a number of lines to display. The last number-lines is
displayed. The range is from 1 to 100 lines.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show logging nvram
541