Cisco Nexus 7000 Series Reference Manual page 354

power efficient-ethernet
power efficient-ethernet
To enable Energy Efficient Ethernet (EEE) for the port or port range, use the power efficient-ethernet
command. To disable this feature, use the no form of this command.
Syntax Description auto
sleep
threshold
aggressive
Defaults
no power efficient-ethernet (that is EEE is off).
Command Modes
Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
6.1(2)
Usage Guidelines
This command does not require a license.
Examples This example shows how to enable auto negotiation for EEE for the port or port range:
switch(config-if)# power efficient-ethernet auto
ERROR: Ethernet2/1: Port is not capable of Energy Efficient Ethernet
This example shows how to enable EEE LPI threshold aggressive sleep mode:
switch(config-if)# power efficient-ethernet sleep threshold aggressive
ERROR: Ethernet2/1: Port is not capable of Energy Efficient Ethernet
Related Commands Command
show module
Cisco Nexus 7000 Series NX-OS System Management Command Reference
326
power efficient-ethernet auto | sleep threshold aggressive
no power efficient-ethernet auto | sleep threshold aggressive
Specifies auto negotiation for EEE.
Specifies the EEE low power idle sleep configuration.
Specifies the EEE low power idle sleep threshold.
Specifies the EEE low power idle aggressive sleep mode.
Modification
This command was introduced.
Description
Displays information about a module.
P Commands
OL-25806-03