Show Logging Onboard - Cisco Nexus 7000 Series Reference Manual

Show Commands

show logging onboard

To display the onboard failure log (OBFL), use the show logging onboard command.
Syntax Description boot-uptime
device-version
endtime
environmental-
history
error-stats
port number
exception-log
interrupt-stats
module module
obfl-history
obfl-logs
stack-trace
starttime
status
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
OL-25806-03
show logging onboard {boot-uptime | device-version | endtime | environmental-history |
error-stats [port number] | exception-log | interrupt-stats | module module | obfl-history |
obfl-logs | stack-trace | starttime time [options] | status}
Displays the OBFL boot and uptime information.
Displays the OBFL device version information.
Displays the OBFL logs until the end time, in the format mm/dd/yy-HH:MM:SS.
Displays the OBFL environmental history.
Displays the OBFL error statistics. Optionally, you can provide a port number to
view the error statistics for the specified port.
(Optional) Displays OBFL error statistics for a port. The range is from 1 to 64.
Displays the OBFL exception log.
Displays the OBFL interrupt statistics.
Displays the OBFL information for the specified module. The range is from 1 to
18.
To get more specific information from the selected module, you can optionally
provide any of the other arguments for the show logging onboard command.
Displays the OBFL history information.
Displays the OBFL Technical Support log.
Displays the OBFL stack trace.
Displays the OBFL logs from the start time, in the format mm/dd/yy-HH:MM:SS.
Displays the OBFL enable/disable status.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show logging onboard
549