Cisco Nexus 7000 Series Reference Manual page 30

abort (Call home)
abort (Call home)
To delete a Call home Cisco Fabric Services (CFS) configuration session without applying the
configuration, use the abort command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Call home configuration
Supported User Roles
network-admin
vdc-admin
Command History Release
4.1(2)
Usage Guidelines
The abort command is supported only on the device where the CFS fabric lock is acquired.
This command does not require a license.
Examples
This example shows how to abort a Call home CFS configuration session:
switch(config-callhome)# abort
switch(config-callhome)# show callhome session status
Last Action Time Stamp
Last Action
Last Action Result
Last Action Failure Reason : none
Related Commands Command
show session status
callhome
callhome distribute
Cisco Nexus 7000 Series NX-OS System Management Command Reference
2
abort
Modification
This command was introduced.
Description
Displays the status of the current CFS configuration session, including the
last action and its result.
Enters the Call home configuration mode.
Enables CFS distribution of the Call home configuration.
: Mon Dec 22 17:34:37 2008
: Abort
: Success
A Commands
OL-25806-03