Cisco Nexus 7000 Series Reference Manual page 107

C Commands
Examples This example shows how to configure the direction of the flow nonkey that was monitored as a nonkey
field:
switch(config)# flow record FLOW-RECORD-1
switch(config-flow-record)# collect flow direction
This example shows how to configure an ID of the flow sampler that is assigned to the flow as a nonkey
field and collects the ID of the flow sampler:
switch(config)# flow record FLOW-RECORD-1
switch(config-flow-record)# collect flow sampler
Related Commands Command
collect counter
collect flow
collect interface
collect ipv4
collect routing
collect timestamp
collect transport
flow record
match flow
match interface
match ipv4
match routing
match timestamp
match transport
show flow record
OL-25806-03
Description
Configures the counters as a nonkey field and collects the counter values.
Configures flow identifying fields as nonkey fields and collects their values.
Configures the input and/or output interface as a nonkey field and collects
the values.
Configures an IPv4 field as a nonkey field and collects the value in it.
Configures a routing attribute as a nonkey field and collects the value of the
field.
Configures the times tamp fields as nonkey fields and collects the values.
Configures a transport layer field as a nonkey field and collects the values.
Creates a flow record.
Configures one or more of the flow fields as key fields.
Configures the direction that traffic flows in respect to an interface (interface
field) as a key field.
Configures one or more of the IPv4 fields as a key field.
Configures one or more of the routing fields as a key field.
Configures a time stamp field as a key field.
Configures one or more of the transport fields as key fields.
Displays the flow record status and statistics.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
collect flow
79