Show Startup-Config Ntp - Cisco Nexus 7000 Series Reference Manual

Show Commands

show startup-config ntp

To display the Network Time Protocol (NTP) startup configuration, use the show startup-config ntp
command.
Syntax Description all
Defaults None
Command Modes
Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the NTP startup configuration:
switch(config)# show startup-config ntp
!Command: show startup-config ntp
!Time: Tue Feb
!Startup config saved at: Thu Jan 21 08:39:42 2010
version 5.0(2)
ntp server 192.0.2.10 use-vrf Red
ntp peer 2001:db8::4101
ntp authenticate
ntp authentication-key 42 md5 dJmhwKzd 7
ntp trusted-key 42
ntp logging
ntp access-group peer NT_GLOBAL
switch(config)#
OL-25806-03
show startup-config ntp [all]
(Optional) Displays all NTP startup configurations.
Modification
This command was introduced.
2 22:45:37 2010
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show startup-config ntp
661