Show Commands
show event manager policy-state
To display the state of the named Embedded Event Manager (EEM) policy, use the show event manager
policy-state command.
Syntax Description
name
module module
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the state of an EEM policy:
switch# show event manager policy-state policy42
switch#
OL-25806-03
show event manager policy-state name [module module]
Name of a policy to display its state.
(Optional) Displays the policy state defined for a specific module. The range is
from 1 to 10.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show event manager policy-state
473