exporter
exporter
To specify a NetFlow exporter to use for a NetFlow monitor, use the exporter command. To remove a
NetFlow exporter, use the no form of this command.
Syntax Description
name
Defaults
None
Command Modes
NetFlow monitor configuration (config-flow-monitor)
Supported User Roles
network-admin
vdc-admin
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure a NetFlow exporter for a NetFlow monitor:
switch(config)# flow monitor Custom-Flow-Monitor-1
switch(config-flow-monitor)# exporter Custom-Flow-Exporter-1
switch(config-flow-monitor)#
This example shows how to remove a NetFlow exporter:
switch(config-flow-monitor)# no exporter
Related Commands
Command
show flow sw-monitor
Cisco Nexus 7000 Series NX-OS System Management Command Reference
172
exporter name
no exporter name
Name of the exporter.
Modification
This command was introduced.
Description
Displays information about NetFlow monitors.
E Commands
OL-25806-03