Ntp Disable - Cisco Nexus 7000 Series Reference Manual

ntp disable

ntp disable
To disable Network Time Protocol (NTP), use the ntp disable command. To reenable NTP, use the no
form of this command.
Syntax Description ip
ipv6
Defaults
Enabled
Command Modes Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
6.2(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to disable NTP:
switch# ntp disable
Related Commands Command
ntp enable
Cisco Nexus 7000 Series NX-OS System Management Command Reference
296
ntp disable {ip | ipv6}
no ntp disable {ip | ipv6}
Disables IPv4 on the interface.
Disables IPv6 on the interface.
Modification
This command was introduced.
Description
Enables NTP.
N Commands
OL-25806-03