Event Manager Run - Cisco Nexus 7000 Series Reference Manual

E Commands

event manager run

To manually run a registered Embedded Event Manager (EEM) policy, use the event manager run
command.
Syntax Description policy-name
Defaults None
Command Modes
Embedded event manager
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to manually run a registered EEM policy:
switch# configure terminal
switch(config)# event manager run fanpolicy.vsh
switch(config)#
OL-25806-03
event manager run policy-name
Name of the registered EEM policy to run.
System policy names begin with two underscore characters (__).
Note
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
event manager run
155