Show Commands
show startup-config snmp
To display the startup Simple Network Management Protocol (SNMP) configuration of a system, use the
show startup-config snmp command.
Syntax Description
all
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
4.1(2)
Usage Guidelines
This command does not require a license.
OL-25806-03
show startup-config snmp [all]
(Optional) Displays the startup SNMP configuration with defaults.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
show startup-config snmp
663